Cisco SG300-10 Guía De Instalación Rápida

Verify that a computer with Microsoft Internet Explorer (version 6 and 
higher) or Firefox (version 2.0 or higher) is available.

The switch can be accessed and managed by two different methods; over 
your IP network using the web-based interface, or by the menu CLI 
through the console port. Using the console port requires advanced user 
skills.

In order to access the switch with a web-based interface, you will need to 
know the IP address the switch is using. The default configuration of the 
switch is to use its factory default IP address of 192.168.1.254 until it has 
obtained an IP address from a DHCP server.

When the switch is using the factory default IP address, its power LED 
flashes continuously.   When the switch is using a DHCP assigned IP 
address or an administrator configured static IP address, the power LED is 
on solid. 

If the managed switch IP address is changed, either by a DHCP 

server or manually, your access to the managed switch will be lost and 
you must enter the new IP address to use the web-based interface. 

To configure the managed switch:

Power on the computer and the switch.

Connect the computer to the switch. You can connect to the same 
IP subnet as the switch by connecting them directly with an 
Ethernet cable, or by connecting to the same LAN where the 
switch is located through other switches.   You can also connect 
your computer to the switch from another IP subnet through one or 
more IP routers. 

Set up the IP configuration on your computer. 

a.

If the switch is using the default static IP address of 
192.168.1.254, you must chose an IP address in the range of 
192.168.1.2-192.168.1.253 that is not already in use.

b. If the IP addresses will be assigned by DHCP, make sure your 

DHCP server is running and can be reached from the switch