Linksys BEFSR81 Instruccion De Instalación

D

1

c

In the Primary and Secondary 

DNS fields, enter the DNS 

address(es) provided by your 

ISP. You need to enter at least 

one DNS address.

d

Click the Save Settings button, 

and go to Step F.

a

If your ISP says that you are 

connecting through PPPoE or if 

you normally enter a user 

name and password to access 

the Internet, then select PPPoE 

as the Internet Connection 

Type.

b

Enter the User Name and Pass-

word provided by your ISP.

c

Click the Save Settings button. 

d

Click the Status tab, and then 

click the Connect button to 

start the connection.

e

Go to Step F.

RAS is a service used in Singapore 

only. If you are using a RAS connec-

tion, check with your ISP for the nec-

essary setup information. When you 

are finished, go to Step F.

D

In its drop-down menu, the 

Internet Connection Type set-

ting features six Internet con-

nection types: obtain an IP 

automatically (DHCP), Static IP, 

PPPoE, RAS, PPTP, and Heart 

Beat Signal. Depending on 

which connection type you 

select, the features available 

on the Basic Setup screen will 

differ. Proceed to the instruc-

tions for the connection type 

you are using.

a

If your ISP says that you are 

connecting through DHCP or a 

dynamic IP address from your 

ISP, then select Obtain an IP 

automatically as the Internet 

Connection Type.

b

Click the Save Settings button, 

and go to Step F.

a

If your ISP says that you are 

connecting through a static or 

fixed IP address from your ISP, 

then select Static IP as the 

Internet Connection Type.

b

Enter the IP Address, Subnet 

Mask and Default Gateway 

address provided by your ISP.

J

To test the Router’s settings, 

open your web browser from 

any computer. In the browser’s 

Address field, enter 

www.linksys.com/registration 

and press the Enter key.

Congratulations! The installation of 

the Router is complete.

PPTP is a service used in Europe and 

Israel only. IF you are using a PPTP 

connection, check with your ISP for 

the necessary setup information. 

When you are finished, go to Step F.

Heart Beat Signal is a service used in 

Australia only. If you are using a Heart 

Beat Signal connection, check with 

your ISP for the necessary setup infor-

mation. When you are finished, go to 

Step F.

F

Depending on the setup infor-

mation from your ISP, you may 

need to provide a host name 

and domain name for the 

Router. The Host Name and 

Domain Name fields are usu-

ally left blank. If requested by 

your ISP (usually cable ISPs), 

complete these two fields.

G

If you haven’t already done so, 

click the Save Settings button. 

Then close the web browser.

H

Power your cable or DSL 

modem off and back on 

again.

I

Restart or power on your PCs so 

they can obtain the Router’s 

new settings.

BEFSR81_V3-QI-30731NC JL

For additional information or troubleshooting 
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further 
support.

800-326-7114 
(toll-free from US or Canada)

support@linksys.com

http://www.linksys.com   or

http://support.linksys.com

http://www.linksys.com/support

ftp://ftp.linksys.com

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of 
Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. Copyright © 2003 
Cisco Systems, Inc. All rights reserved.

Model No.

D

2

D

3

D

4

D

5

D

6

J