Linksys SPA921 Tarjeta De Referencia Rápida

Model No.

Quick Reference

Model Nos.

(For SPA921 and SPA922

) 

• Caller information will display on the LCD 

screen. 

• To access more than one simultaneous 

call, use the hold or conference feature.

(For SPA941, SPA942 and SPA962) 

• Calls will come in on the first available 

line.

• Call information will display on the LCD 

screen.

• Mute the call by pressing the mute button. 
• Press the mute button again to cancel.

• Press the hold button to put the active call 

on hold. If there is another incoming call, 
you can now answer the 2

nd

 call or line. 

• For multiple lines (SPA941, SPA942 and 

SPA962), the call’s line will flash red.

•   Resume  the  1

st

 call by pressing the line 

button associated with the 1

st

 call. 

• If  the  2

nd

 call is still in progress it will 

automatically go on hold.

• From a handset, hang up.
• From a speaker call, press the speaker 

button. 

• From a headset call, press the headset 

button. 

In this display, more choices are available by 
pressing the right navigation button.

Press to activate a soft button feature. 

Use to move up, down, left or right through soft 
button features. 

(SPA 941, SPA942 and SPA962 only)

Use to access additional extensions. 
The SPA941 and SPA942 have four lines, the 
SPA962 has six lines.

• Lift the handset and dial, or 

• C

onnect the headset (port is on right side of 

phone), press the headset button and dial, or

• Press the speaker button and dial.

 Only one device at a time can be used.

 

• Press the button for the device.
• Adjust volume as needed.

• To redial the last number called, press the soft 

button below redial twice.

• To view directory choices, press the soft button 

under dir. Use the navigation button to highlight 
your choice. Press dial to call.

• To dial the number of the last call the phone 

received, press the soft button under lcr.

•

Speed dial numbers must already be programmed into the 
phone (see Setup Shortcuts)

• Dial the speed dial number and then lift the hand-

set, or

• lift the handset and dial the speed dial number, 

followed by the # button on the phone, 

• the entry in the speed dial list will be dialed      

automatically. 

• Top line displays date, time, phone number
• main area displays call information
• bottom lines display soft button options
• right side displays extension numbers, if available.
• The SPA962 has a 320 x 240 pixel color display

Shows available features.
As shown above, by pressing the soft button below 
the feature, you could:

redial: view redial list
dir: view directory options 
cfwd: forward your calls
dnd: choose do not disturb. 

 

IP Phone SPA942