Linksys EG008W Folleto
Gigabit 8-Port
Workgroup Switch
he Gigabit 8-Port Workgroup Switch provides non-block-
ing, wire speed switching for your 10, 100, and 1000
megabit network clients. Drop this switch in place of your
ing, wire speed switching for your 10, 100, and 1000
megabit network clients. Drop this switch in place of your
current workgroup hub or switch, and you can upgrade your
high-requirement workstations to full Gigabit speeds as neces-
sary, while continuing to service other clients at their current
speeds. Or build your network from the ground up, with appro-
priate link speeds for each user's requirements.
high-requirement workstations to full Gigabit speeds as neces-
sary, while continuing to service other clients at their current
speeds. Or build your network from the ground up, with appro-
priate link speeds for each user's requirements.
Apply this switching power to your current hub-based Ethernet
network, and your data traffic efficiency will improve several
times over. Connect your Gigabit-equipped workstations to the
Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth
of up to 2000Mbps! It's perfect for graphics, multimedia, and
other applications that have to move large files across the net-
work quickly.
network, and your data traffic efficiency will improve several
times over. Connect your Gigabit-equipped workstations to the
Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth
of up to 2000Mbps! It's perfect for graphics, multimedia, and
other applications that have to move large files across the net-
work quickly.
With the Gigabit 8-Port Workgroup Switch, you can connect your
existing 10/100 Ethernet network to your Gigabit server back-
bone without any additional equipment. All ports are auto-nego-
tiating, and have automatic MDI/MDI-X crossover detection, so
you don't have to worry about the cable type. Address learning
and aging is supported, as well as 802.3x flow control with
head-of-line blocking prevention to keep your high-speed clients
from bogging down in lower-speed traffic.
existing 10/100 Ethernet network to your Gigabit server back-
bone without any additional equipment. All ports are auto-nego-
tiating, and have automatic MDI/MDI-X crossover detection, so
you don't have to worry about the cable type. Address learning
and aging is supported, as well as 802.3x flow control with
head-of-line blocking prevention to keep your high-speed clients
from bogging down in lower-speed traffic.
The Gigabit 8-Port Workgroup Switch from Linksys is the perfect
solution for your desktop Gigabit and 10/100 networking needs.
solution for your desktop Gigabit and 10/100 networking needs.
• 8 RJ-45 10/100/1000Mbps auto-sensing half/full duplex
switched ports
• All ports suppport auto MDI/MDI-X cable detection
• Fully compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab
• Non head-of-line blocking architecture
• Full-duplex IEEE 802.3x flow control and half-duplex back-
pressure with intelligent port-based congestion detection
and broadcast rate control
and broadcast rate control
Gigabit 8-Port Workgroup Switch
Model No.: EG008W
Connects network devices together, managing
the flow of data between them.
Features
Features
Benefits
Benefits
• Eight 10/100/1000Mbps, half/full duplex,
switched ports
• Forwards and filters packets at non-blocking,
full wire speed
• All ports have auto speed negotiation and auto
MDI/MDI-X crossover detection
• Supports address learning and aging, 802.3x
flow control and head-of-line blocking preven-
tion
tion
Instant Gigabit
®
Series
T