Linksys EG0801SK Prospecto
Package Contents
EtherFast
®
10/100/1000 8+1 Workgroup
GigaSwitch Starter Kit
• One Instant Gigabit (32-Bit) Network Adapter
• One 10/100/1000 8+1 Workgroup GigaSwitch
• One Category 5E Network Crossover Cable
• One 10/100/1000 8+1 Workgroup GigaSwitch
• One Category 5E Network Crossover Cable
(10 Ft.)
• One 3.5” Driver Disk
• One AC Power Adapter
• One Stacking/Wall Mounting Module
• One User Guide and Registration Card
• One AC Power Adapter
• One Stacking/Wall Mounting Module
• One User Guide and Registration Card
Model Number: EG
0801
SK
Linksys
17401 Armstrong Ave.
Irvine, CA 92614 USA
Irvine, CA 92614 USA
Information
(800) 546-5797
Technical Support
(800) 326-7114
(949) 261-1288
Fax
(949) 261-8868
World Wide Web
http://www.linksys.com
Email
sales@linksys.com
support@linksys.com
China
Tech Support
(10) 6432 1920
Sales
(10) 6432 1923
Fax
(10) 6437 6891
Japan
Telephone
(03) 5259-5139
Fax
(03) 5259-5117
Philippines
Telephone
(632) 638 5580
Fax
(632) 635 6772
Singapore
Telephone
552-8998
Fax
552-1024
Thailand
Telephone
717-0770
Fax
717-0738
United Kingdom
Tech Support
0870 7393939
Sales
01245 352403
Fax
0870 7393938
DS-EG0801SK-10207NC DG
The Instant Gigabit Adapter’s
Wake-on-Lan feature is optional. In
order to use the feature, the card
must be properly connected to a PCI
motherboard that supports WOL
event management. If your mother-
board does not support Wake-on-
Lan, the card will operate as a nor-
mal Network Adapter.
Wake-on-Lan feature is optional. In
order to use the feature, the card
must be properly connected to a PCI
motherboard that supports WOL
event management. If your mother-
board does not support Wake-on-
Lan, the card will operate as a nor-
mal Network Adapter.
WOL
Wake-On-LAN Compatible
• Pentium 90 Mhz CPU or faster
• 16MB of RAM
• PCI Local Bus 2.1 Compliant
• WIndows 95 (or higher) Operating System
• 16MB of RAM
• PCI Local Bus 2.1 Compliant
• WIndows 95 (or higher) Operating System
System Requirements
Specifications
Instant Gigabit Network Adapter
Model
EG1032
Standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3x,PCI 2.1, PCI 2.2,
ACPI
ACPI
Protocol
CSMA/CD
Ports:
1 Straight-Through 10BaseT/100BaseTX/
1000BaseT RJ-45 Port (Auto-Senses Speed
and Duplex)
1000BaseT RJ-45 Port (Auto-Senses Speed
and Duplex)
Cabling Type:
10BaseT: UTP/STP Category 3 or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5e or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5e or better
Topology:
Star
Speed:
Full Duplex: 20Mbps,200Mbps or 2000Mbps
Half Duplex: 10Mbps,100Mbps or 1000Mbps
Half Duplex: 10Mbps,100Mbps or 1000Mbps
WOL Support:
Remote Wake-Up
Power Management Event (PME)
Power Management Event (PME)
Bus Type:
32-Bit PCI
LEDs:
Link/Activity, 1000Mbps
10/100/1000 8+1 Workgroup GigaSwitch
Model Number
EG0801W
Standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Protocol
CSMA/CD
Ports
Eight 10/100 RJ-45 Ports, One Gbps Full-
Duplex RJ-45 Port
Duplex RJ-45 Port
Cabling Type
10BaseT: UTP/STP Category 3 or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5E or better
100BaseTX: UTP/STP Category 5 or better
1000BaseT: UTP/STP Category 5E or better
Topology
Star
Speed Per Port
10Mbps or 100Mbps (Half Duplex)
20Mbps or 200Mbps (Full Duplex)
1000Mbps or 2000Mbps (Gigabit Port)
20Mbps or 200Mbps (Full Duplex)
1000Mbps or 2000Mbps (Gigabit Port)
LEDs
Link/Act, Full/Half Duplex/Col, 10/100
Environmental
Instant Gigabit Network Adapter
Dimensions:
5” x 6.8” x .75” (127mm x 173mm x 19mm)
Unit Weight:
3.2 oz. (.09 Kg)
Power:
5W Maximum
Certifications:
FCC Class B, CE Mark, Commercial UL and CSA Listed
Operating Temp.:
32ºF to 122ºF (0ºC to 50ºC)
Storage Temp.:
-4ºF to 158ºF (-20ºC to 70ºC)
Operating Hum.:
10% to 85% Non-Condensing
Storage Hum.:
5% to 90% Non-Condensing
10/100/1000 8+1 Workgroup GigaSwitch
Dimensions:
7.31” x 6.06” x 1.88” (186mm x 154mm x 48mm)
Unit Weight:
13.6 oz. (.39Kg)
Power:
3.3V DC, 5A
Certifications:
FCC Class B, CE Mark Commercial
Operating Temp.:
0ºC to 40ºC (32ºF to 104ºF)
Storage Temp.:
-20ºC to 70ºC (-4ºF to 158ºF)
Operating Humidity:
10% to 85% Non-Condensing
Storage Humidity:
5% to 90% Non-Condensing