Linksys RV042 Guía Del Usuario

8

Chapter 3: Getting to Know the Router

The Router’s LEDs are located on the front panel of the Router.

Green. The System LED lights up when the Router is powered on. If the LED is flashing, 
the Router is running a diagnostic test.

Orange. The Diag LED lights up when the system is not ready. The LED goes off when 
the system is ready.

Green. The Internet LED lights up when the Router is connected to your cable or DSL 
modem.

Green. The DMZ/Internet LED lights up when the Router is connected to your cable or 
DSL modem when used as an Internet port, and it lights up when the Router is 
connected to the hub, switch, or public server when used as a DMZ port. 

Green. The DMZ Mode LED lights up when the Router is using DMZ mode.

Green. The LAN LED serves two purposes. If the LED is continuously lit, the Router is 
connected to a device through the corresponding port (1, 2, 3, or 4). If the LED is 
flashing, the Router is actively sending or receiving data over that port.