Cisco sf 200-24p Guía De Instalación Rápida

PoE is available on the following ports:

Use the following table to determine the total power budget available for 
all devices on your switch.

Verify that a computer with Microsoft Internet Explorer (version 6 or higher) 
or Firefox (version 2.0 or higher) is available.

In order to access the switch with a web-based interface, you must know 
the management IP address of the switch. The default configuration of the 
switch is to use its factory default IP address of 192.168.1.254 until it has 
obtained an IP address from a DHCP server, or it has been changed to a 
static IP address.

When the switch is using the factory default IP address, its System LED 
flashes continuously.   When the switch is using a DHCP assigned IP 
address or an administrator configured static IP address, the System LED 
lights steady. 

If the smart switch IP address is changed, either by a DHCP server 

or manually, your access to the smart switch will be lost and you must 
use the new IP address to configure the device. 

To configure the smart switch:

Power on the computer and the switch.

Connect the computer to the switch. You can connect to the same 
IP subnet as the switch by connecting them directly with an 

SF 200-24P and SG 200-26P

1—6 and 13—18

SF 200-48P and SG 200-50P

1—12 and 25—36

SF 200-24P

100 Watts

SF 200-48P

180 Watts

SG 200-26P

100 Watts

SG 200-50P

180 Watts