Cisco sf 200-24p Guía De Instalación Rápida
200 Series Smart Switches
9
Back Panel
The power port is located on the back panel of the smart switch.
Returning the Device to the Factory
Default Settings
Default Settings
To use the
Reset
button to reboot or reset the smart switch, do the
following:
• To reboot the smart switch, press the
Reset
button for less than 10
seconds.
• To restore the smart switch configuration to the factory default settings:
1. Disconnect the smart switch from the network or disable all DHCP
servers on your network.
2. With the power on, press and hold the
Reset
button for more than
10 seconds.
5