Advantek Networks awr-1054gr Guía Del Usuario

be saved as current setting. “WLANn_XXXX”, where ‘n’ could be 0 or 1 represented as 1st and

2nd wlan interface. By default, 1st wlan interface will use the 8186 internal wlan controller, and

2nd interface will base on external wlan adapter through 8186 PCI interface.

3.5 TCP/IP Settings

3.5.1 LAN Interface

This page is used to configure the parameters for local area network which connects to the LAN

port of your AP Router. Here you may change the setting for IP addresses, subnet mask,

DHCP…etc.

3.5.2 WAN Interface