Alcatel-Lucent 6850-48 Guía De La Red
Modifying IPMS Parameters
Configuring IP Multicast Switching
page 42-16
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Restoring the IGMP Query Response Interval
To restore the IGMP query response interval to its default (i.e., 100 tenths-of-seconds) value on the system
if no VLAN is specified, use the
if no VLAN is specified, use the
command by entering:
-> ip multicast query-response-interval 0
Or, as an alternative, enter:
-> ip multicast query-response-interval
To restore the IGMP query response interval to its default value.
You can also restore the IGMP query response interval on the specified VLAN by entering:
-> ip multicast van 2 query-response-interval 0
Or, as an alternative, enter:
-> ip multicast vlan 2 query-response-interval
To restore the IGMP query response interval to its default value.
Modifying the IGMP Router Timeout
The default IGMP router timeout (i.e., expiry time of IP multicast routers) is 90 seconds. The following
subsections describe how to configure a user-specified router timeout value and how to restore it with the
subsections describe how to configure a user-specified router timeout value and how to restore it with the
Configuring the IGMP Router Timeout
You can modify the IGMP router timeout from 1 to 65535 seconds by entering
360 seconds on the system if no VLAN is specified, you would enter:
-> ip multicast router-timeout 360
You can also modify the IGMP router timeout on the specified VLAN by entering:
-> ip multicast vlan 2 router-timeout 360
Restoring the IGMP Router Timeout
To restore the IGMP router timeout to its default (i.e., 90 seconds) value on the system if no VLAN is
specified, use the
specified, use the
command by entering:
-> ip multicast router-timeout 0
Or, as an alternative, enter:
-> ip multicast router-timeout
To restore the IGMP router timeout to its default value.