Alcatel-Lucent 6850-48 Guía De Referencia
OSPF Commands
page 41-24
OmniSwitch CLI Reference Guide
September 2009
ip ospf area range
Creates a route summarization instance whereby a range of addresses assigned for the route at the area
border router will be advertised.
border router will be advertised.
ip ospf area area_id range {summary | nssa} ip_address subnet_mask
[effect {admatching | noMatching}]
[effect {admatching | noMatching}]
no ip ospf area area_id range {summary | nssa} ip_address subnet_mask
Syntax Definitions
area_id
A unique 32-bit value in IP address format.
summary
Advertises the address range as a summary link state advertisement
(LSA).
(LSA).
nssa
Advertises the address range of Not So Stubby Area (NSSA) routes as a
Type 5 advertisement.
Type 5 advertisement.
ip_address
A 32-bit IP address for the range’s area.
subnet_mask
A 32-bit subnet mask that determines how many bits of the IP address
denote the network number.
denote the network number.
admatching
Determines that routes specified falling within the specified range will
be advertised.
be advertised.
noMatching
Determines that any route falling within the specified range will not be
advertised.
advertised.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• Route summarization is the consolidation of addresses within an area which are advertised as a single
route. When network numbers in an area are assigned consecutively, the area border router can be
configured, using this command, to advertise a route that aggregates all the individual networks within
the range.
configured, using this command, to advertise a route that aggregates all the individual networks within
the range.
• Using this command causes a single route to be advertised, for an address range in the specified area, to
other areas.
parameter
default
summary | nssa
summary
admatching | noMatching
admatching