Alcatel-Lucent 6850-48 Guía De Referencia
AAA Commands
page 58-30
OmniSwitch CLI Reference Guide
September 2009
aaa accounting 802.1x
Enables/disables accounting for 802.1X authentication sessions. Accounting servers keep track of network
resources (time, packets, bytes, etc.) and user activity.
resources (time, packets, bytes, etc.) and user activity.
aaa accounting 802.1x server1 [server2...] [local]
no aaa accounting 802.1x
Syntax Definitions
server1
The name of the RADIUS, TACACS+, or LDAP server used for 802.1X
accounting. At least one server is required. RADIUS, TACACS+, and
LDAP server names are set up through the
accounting. At least one server is required. RADIUS, TACACS+, and
LDAP server names are set up through the
commands.
server2...
The names of backup servers for 802.1X accounting. Up to 3 backups
may be specified (including local); include a space between each server
name. These backups are only used if server1 becomes unavailable.
They are polled in the order they are listed in this command. The first
available server becomes the accounting server.
may be specified (including local); include a space between each server
name. These backups are only used if server1 becomes unavailable.
They are polled in the order they are listed in this command. The first
available server becomes the accounting server.
local
Local accounting is done through the Switch Logging feature in the
switch. See
switch. See
for information
about Switch Logging commands.
Defaults
Accounting is disabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of the command to disable accounting for 802.1X ports.
• Up to 4 accounting servers (total) may be specified. At least one server is required. Each server name
should be separated by a space.
• The servers may be RADIUS, TACACS+, or LDAP servers, and/or the local Switch Logging facility.
• If local is specified as server1, the switch will only use the local Switching Logging facility for
accounting.
• If local is specified as a backup, it should be entered last in the list of servers. The Switch Logging
facility is always available if the switch is up.
• The switch uses only the first available server in the list for accounting. For example, if server1 is not
available, the switch will use server2.
• RADIUS, TACACS+, and LDAP servers may each have an additional backup specified through the
commands.