Franklin ic-142 Manual De Usuario
52
Copying to and from PCs
You can copy information to and from an Organiz-It
to a personal computer (PC) using the serial port
found on certain Digital Book System models. Your
PC must be MS-DOS
to a personal computer (PC) using the serial port
found on certain Digital Book System models. Your
PC must be MS-DOS
®
-compatible and have an in-
stalled communications program.
NOTE: The steps in this section assume you are us-
ing the Terminal communications program included
with Windows
ing the Terminal communications program included
with Windows
®
. If you are using another communica-
tions program, refer to its user’s manual.
Preparing to Copy
1. Connect the serial cable from the port on the
Organiz-It to a serial port on your computer.
Make sure the cable’s plug is inserted into the
Digital Book System with its wider side facing up.
Make sure the cable’s plug is inserted into the
Digital Book System with its wider side facing up.
2. Double-click the Main icon in the Program
Manager window.
3. Double-click the Terminal icon in the Main window.
4. Select
4. Select
Communications from the Settings menu.
5. Select a serial port (COM1, COM2, etc.), if needed.
6. Select these communication settings:
6. Select these communication settings:
• 2400 baud rate
• 8 data bits
• 1 stop bit
• parity none
• flow control Xon/Xoff.
• 8 data bits
• 1 stop bit
• parity none
• flow control Xon/Xoff.
7. Click
OK.
▼