Fujitsu P1610 Manual De Usuario

The BIOS Setup Utility is a program that sets up the 
operating environment for your notebook. Your BIOS is 
set at the factory for normal operating conditions, 
therefore there is no need to set or change the BIOS 
environment to operate your notebook.

The BIOS Setup Utility configures:

■

Device control feature parameters, such as changing
I/O addresses and boot devices.

■

System Data Security feature parameters, such
as passwords.

Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following (or use 
the TrustedCore Menu, as detailed in the next section): 

1. Turn on or restart your notebook.

2. Press [F2] once the Fujitsu logo appears on the 

screen. This will open the main menu of the BIOS 
Setup Utility with the current settings displayed.

3. Press the [RIGHT ARROW] or [LEFT ARROW] key 

to scroll through the other setup menus to review or 
alter the current settings.

When the Fujitsu logo appears on the screen. press the 
[Enter] key or click on the left mouse or touchpad 
button; the TrustedCore Menu will appear. 

The TrustedCore Menu provides shortcuts to the 
following menus and information screens: 

■

BIOS Setup

■

Diagnostic Screen

■

Boot Menu

■

Patent Information

■

System Information

■

Continue Booting

Clicking on any of the fields will invoke the screen, 
information, or action described.

The Boot Menu can also be invoked by pressing the 
[F12] key when the Fujitsu logo appears on the screen.

Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main, 
Advanced, Security, Boot, Info and Exit. This document 
explains each menu and all submenus and setup items.

The following procedures allow you to navigate the 
setup utility menus:

1. To select a menu, use the cursor keys: [

], [

]. 

2. To select a field within a menu or a submenu, use the 

cursor keys: [

], [

]. 

3. To select the different values for each field, press the 

[

] or [

] to change to the next higher selec-

tion and [

] or [-] to go to the next lower selection.

4. To activate a submenu press 

].

5. To return to a menu from a submenu, press [

].

6. To go to Exit menu from another menu, press [

].

7. Pressing the [

] key resets all items in the BIOS to 

the default values.

8. Pressing the [

] key saves the current configura-

tion and exits the BIOS Setup Utility. You will be 
asked to verify this selection before it is executed.

9. Pressing the [

] key gives you a general help screen.

Entering the Setup Utility After a 
Configuration Change or System Failure
If there has been a change in system configuration that 
does not match the parameter settings stored in your 
BIOS memory, or there is a failure in the system, the 
system beeps and/or displays an error message after the 
Power On Self Test (POST). If the failure is not severe, it 
will give you the opportunity to modify the settings of 
the setup utility, as described in the following steps:

• Selecting a field causes a help message 

about that field to be displayed on the 
right-hand side of the screen.

• Pressing [Enter] with the highlight on a 

selection that is not a submenu or auto 
selection will cause a list of all options 
for that item to be displayed. Pressing 
the Enter key again will select the high-
lighted choice.