Trendnet TV-H510 Manual De Usuario
English
5
3. Insert the TV-H510 power adapter,
the IP Camera's power adapter
and TEW-ASAK(s) through the
mounting bracket.
and TEW-ASAK(s) through the
mounting bracket.
Installing External Antenna to Wireless IP Camera
Note:
1. Before installation, you need the following products: TEW-ASAK,
1. Before installation, you need the following products: TEW-ASAK,
antenna cable (TEW-L406 or TEW-L412) and an external antenna
(TEW-AO14D).
(TEW-AO14D).
2. Since the TV-IP512W requires two surge arresters (TEW-ASAK), two
antenna cables (TEW-L406 or TEW-L412) and two external antennas
(TEW-AO14D), you will need to perform steps 3, 4, 5 and 8 for each
surge arrester (TEW-ASAK).
(TEW-AO14D), you will need to perform steps 3, 4, 5 and 8 for each
surge arrester (TEW-ASAK).
1. Remove the antenna from the back
of your wireless IP camera.
2. Follow steps 1-6 in the Hardware
installation section above.
4. Insert the TEW-ASAK(s), the
TV-H510's power adapter and the
IP camera's power adapter through
hole.
IP camera's power adapter through
hole.