BTC dsc 2200v Guía Del Usuario
41
7-1 Troubleshooting on camera (continued):
Operation
Problem
Checking Points
Solution
Recorded pictures
can not be saved in
memory card
can not be saved in
memory card
zCamera power off before the saving
is complete
zRemoving the memory card before
the saving is complete
is complete
zRemoving the memory card before
the saving is complete
zReplace battery
zDo not remove the memory card before
the saving is complete
zDo not remove the memory card before
the saving is complete
Image color is
unnatural
unnatural
zThe photo was taken under the
conditions in which white balance
could not be adjusted.
conditions in which white balance
could not be adjusted.
zTry to preset white balance
Shooting
The flash does not
work
work
zThe flash is set to flash-off
zThe mode selector is set to Video
zThe mode selector is set to Video
zSet the flash to auto or flash on
zSet it to photo mode
zSet it to photo mode
Color is different
from the LCD screen
while recording
from the LCD screen
while recording
zBright sunlight or high-intensity
light is shining directly into the lens
during recording
light is shining directly into the lens
during recording
zMove to a location or place the camera
to prevent lens directly from shine
to prevent lens directly from shine
Playback
Pictures are not
displayed
displayed
zMode is not set to play
zThe memory card does not contain
picture data
zAll image data in the memory card
are deleted
zMemory card has been formatted
a memory card with non-DCF
pictures recorded with another
camera is loaded in the camera
zThe memory card does not contain
picture data
zAll image data in the memory card
are deleted
zMemory card has been formatted
a memory card with non-DCF
pictures recorded with another
camera is loaded in the camera
zChange mode to play
zChange memory card or using another
digital camera which support non-DCF
pictures
zChange memory card or using another
digital camera which support non-DCF
pictures
Others
Can not transmit data
to computer
to computer
zThe camera is not correctly
connected to the computer
connected to the computer
zRefer to manual chapter 4.1