Sony PMW-320K Guía Del Usuario
Locations and Functions of Parts and Controls
15
Chapt
er
1
Ov
er
er
vie
w
c DC IN (DC power input) connector
(XLR type, 4-pin, male)
To operate the camcorder from an AC power
supply, connect an optional DC power cord to this
terminal and then connect the cord to the DC
output terminal of the BC-L70, BC-L160, or
another battery charger.
supply, connect an optional DC power cord to this
terminal and then connect the cord to the DC
output terminal of the BC-L70, BC-L160, or
another battery charger.
d DC OUT 12V (DC power output)
connector (4-pin, female)
Supplies power for an optional WRR-860C/861/
862 UHF Synthesized Diversity Tuner
(maximum 0.5 A).
862 UHF Synthesized Diversity Tuner
(maximum 0.5 A).
Note
Do not connect any equipment other than the UHF
synthesized diversity tuner.
synthesized diversity tuner.
e Battery attachment shoe
Attach a BP-L80S Battery Pack. Alternatively,
you can attach an AC-DN2B/DN10 AC Adaptor
to operate the camcorder on AC power supply.
Attach a BP-L80S Battery Pack. Alternatively,
you can attach an AC-DN2B/DN10 AC Adaptor
to operate the camcorder on AC power supply.
For details, see “Preparing a Power Supply”
(page 34).
(page 34).
Note
For your safety, and to ensure proper operation of the
camcorder, Sony recommends the use of the BP-L80S
Battery Pack.
camcorder, Sony recommends the use of the BP-L80S
Battery Pack.
Adaptor connector
Enables connection of an XDCA-55 HD Camera
Adaptor or an HDCA-702 MPEG TS Adaptor. To
connect an adaptor, remove the cover from the
connector and install the optional CBK-CE01 50
Pin Interface and Digital Extender.
Enables connection of an XDCA-55 HD Camera
Adaptor or an HDCA-702 MPEG TS Adaptor. To
connect an adaptor, remove the cover from the
connector and install the optional CBK-CE01 50
Pin Interface and Digital Extender.
a Shoulder strap fitting
Attach the supplied shoulder strap (see page 48).
Attach the supplied shoulder strap (see page 48).
c Viewfinder front-to-back positioning
lever
To adjust the viewfinder position in the front-to-
back direction, loosen this lever and the LOCK
knob. After adjustment, retighten this lever and
the LOCK knob.
back direction, loosen this lever and the LOCK
knob. After adjustment, retighten this lever and
the LOCK knob.
d Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position
of the viewfinder (see page 36).
Loosen this ring to adjust the left-to-right position
of the viewfinder (see page 36).
e Viewfinder fitting shoe
Attach the viewfinder.
Attach the viewfinder.
f VF (viewfinder) connector (26-pin,
rectangular)
Connect the cable of the supplied viewfinder.
g VF (viewfinder) connector (20-pin,
round)
Connect the cable of the optional DXF-51, DXF-
C50W or DXF-20W viewfinder.
C50W or DXF-20W viewfinder.
For connecting the DXF-51 or DXF-C50W, optional
parts are required. Consult a Sony service
parts are required. Consult a Sony service
Accessory Attachments