RCA 25001re2 Manual De Usuario

3. Press the FLASH/EDIT button to enter into

the programming mode.

4. Press the

or button to select the

desired flash time (100 / 200 / 300 / 400 /
500 / 600 / 700 / 800 / 900 msec).

5. Press the MENU/OK button to confirm/ You

will long beep, and the display shows SAVED,
then returns to the previous menu.

LCD Contrast

You may program the display contrast when
necessary. The default setting is level 3.

1. In standby mode, press the MENU/OK button.

2. Press the

or button to go to LCD

CONTRAST. The display shows LCD
CONTRAST RESET.

3. Press the FLASH/EDIT button to enter the

programming mode.

4. Press the

or button to select the

desired contrast (1/2/3/4/5).

Note: Level 1 represents the minimum contrast, and
level 5 the maximum. During selection, the contrast
changes according to the level selected.

5. Press the MENU/OK button to confirm. You

will hear a long beep, and the display shows
SAVED, then returns to the previous menu.

Reset

Use the RESET option to reset the unit to the
factory defaults.

Note: This setting does not affect the names and
numbers stored in the directory memory.

1. In standby mode, press the MENU/OK button.

2. Press the

or button to go to RESET. The

display shows RESET

NO YES.

3. Press the FLASH/EDIT button to enter the

programming mode. The display shows:

4. To reset to the factory default, press

button to move the pointer to YES, then
press MENU/OK. You will hear a long beep,
and the unit returns to the READY mode.

Connections & Set Up

FLASH TIME

600 MS

LCD CONTRAST

RESET

LCD CONTRAST

RESET
RESET

NO YES