RCA hd52w59 Guía Del Usuario

The next screen welcomes you to your new RCA TV. Press OK to continue with 
the setup. After the welcome screen, the initial setup asks you to make sure 
that you've connected the HDTV to your cable or antenna signal. Once you've 
confi rmed that the HDTV is connected, press OK. The Channel setup screen 
appears. 

The menu system in your TV allows the TV’s features to work properly. The 
fi rst time you turn on your TV, the setup screens appear.

The fi rst part of the setup allows you to select your preferred language for the 
menu system.

If English is your preferred language, press OK. If you want to choose another 
language, press the down arrow button until that language is highlighted, and 
press OK.

The Channel setup screen lets you set your signal source and search for the 
available channels on that source. The Auto channel search allows the TV to 
search for all the viewable channels on both of your tuners—for digital or 
analog channels—or on each antenna separately. This is sometimes called auto 
programming. 

When you fi rst turn on your HDTV, it's set to search on both tuners.  

1.  Make sure the Signal Source is set to Both. If it's not, use the right arrow to 

change the setting to Both.

2.  Press the down arrow button on your remote control to highlight Analog 

Signal Type.

3.  Use the right arrow button to choose the signal type you're receiving on the 

analog tuner—either UHF/VHF Antenna for an off-air antenna or Cable. 

4.  Press the down arrow button on your remote control to highlight Auto 

channel search.

5.  Press OK to start the Auto channel search on both tuners. 

 

When the channel search is complete, press OK to access the List & Labels 
screen.