RCA ps27215 Guía Del Usuario
5
First Things First
TV Guide Plus+ Controller
The TV GUIDE Plus+* controller allows direct control of a cable
box and VCR using a pair of IR (infrared) controllers.
box and VCR using a pair of IR (infrared) controllers.
•
Plug the TV GUIDE Plus+ controller into the VCR CONTROL
jack on the back of the TV.
jack on the back of the TV.
•
Affix the IR controllers directly over the IR remote sensors on
your cable box and VCR.
your cable box and VCR.
68
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO
R
L mono
VCR
CONTROL
Cable Box
VCR
Back of TV
Remote
Sensors
Connect IR controllers to the infrared remote
sensors on your cable box and VCR
sensors on your cable box and VCR
Step 3
Plug in the TV.
Plug the end into the wall outlet, matching the wide blade of
the plug with the wide slot in the outlet. Be sure to insert the
plug completely.
the plug with the wide slot in the outlet. Be sure to insert the
plug completely.
Locating the IR (infrared)
Remote Control Sensor on
Your Cable Box or VCR
Remote Control Sensor on
Your Cable Box or VCR
The IR controllers must be affixed
directly over the IR remote sensors on
your cable box or VCR.
directly over the IR remote sensors on
your cable box or VCR.
Some cable boxes and VCRs label the
IR sensors; others do not. If the
sensors are labeled, affix the IR
controllers directly over them.
IR sensors; others do not. If the
sensors are labeled, affix the IR
controllers directly over them.
IR Remote Sensor
For those that do not label the IR
sensor, you need to use the cable box
or VCR’s remote to locate the sensor
before affixing the IR controllers.
sensor, you need to use the cable box
or VCR’s remote to locate the sensor
before affixing the IR controllers.
1. Hold the remote control so that it
is touching the front of the cable
box or VCR.
box or VCR.
2. Slowly move the remote over the
front of the cable box or VCR
while pressing the remote’s
POWER button on and off
while pressing the remote’s
POWER button on and off
3. When the cable box or VCR turns
off or on, you’ve located the
sensor.
sensor.
You should test the IR controllers
after setting up the TV GUIDE Plus+
system. Temporarily attach the IR
controllers with clear tape to the
spots where you think the sensors
are located. After determining that
the controllers are working correctly,
affix them permanently.
after setting up the TV GUIDE Plus+
system. Temporarily attach the IR
controllers with clear tape to the
spots where you think the sensors
are located. After determining that
the controllers are working correctly,
affix them permanently.
REMOTE SENSOR
VCR
* GUIDE Plus+ is a trademark of Gemstar Development Corporation.
TV GUIDE is a trademark of TV Guide Financial, Inc.