Printronix P5000LJ Manual De Referencia
PCL-II
19
Software Features
This section outlines many of the features available with the software
described in this manual.
described in this manual.
PCL-II
The PCL
®
-II emulation software provides the following features:
•
Graphics and a selection of print densities. You can enable graphics
mode and specify a density mode (dots per inch).
mode and specify a density mode (dots per inch).
•
Print Attributes. Characters can be bold, italic, double high, double wide,
etc.
etc.
•
Page Formatting. PCL-II commands allow you to set line spacing, page
length, and vertical forms control.
length, and vertical forms control.
•
Font Typefaces. Also referred to as print modes. The five typefaces
include Near Letter Quality (NLQ), Data Processing (DP), High Speed
(HS), OCR A, and OCR B.
include Near Letter Quality (NLQ), Data Processing (DP), High Speed
(HS), OCR A, and OCR B.
•
Character Sets. Forty-seven character sets are available. You can print
the character sets in the different print modes. (OCR A and B character
sets must be printed in OCR A and OCR B print modes.)
the character sets in the different print modes. (OCR A and B character
sets must be printed in OCR A and OCR B print modes.)
•
Bar codes. Several bar codes are available, including Code 3 of 9,
Industrial 2 of 5, Interleaved 2 of 5, UPC A, EAN 8, EAN 13, UCC/EAN-
128, UPCE, Royal Mail (including KIX format), Postnet
Industrial 2 of 5, Interleaved 2 of 5, UPC A, EAN 8, EAN 13, UCC/EAN-
128, UPCE, Royal Mail (including KIX format), Postnet
®
11.3 cpi, and
Postnet 4 cpi.
P-Series
The P-Series emulation software provides the following features:
•
Graphics and a selection of print densities. You can enable graphics
mode and specify a density mode (dots per inch).
mode and specify a density mode (dots per inch).
•
Print Attributes. Characters can be bold, double high, double wide, etc.
•
Page Formatting. Commands allow you to set line spacing, page length,
and vertical tabbing.
and vertical tabbing.
•
Font Typefaces. Also referred to as print modes. The five typefaces
include: Near Letter Quality (NLQ) with or without serifs, Data Processing
(DP), High Speed (HS), OCR A, and OCR B.
include: Near Letter Quality (NLQ) with or without serifs, Data Processing
(DP), High Speed (HS), OCR A, and OCR B.
•
Different character sets are available. You can print the character sets in
the different print modes. (OCR A and B character sets must be printed in
OCR A and OCR B print modes.)
the different print modes. (OCR A and B character sets must be printed in
OCR A and OCR B print modes.)
Note
For software installation instructions, refer to the
User’s Manual.