Printronix l7032 Manual De Usuario
Figure 5-23. Putting the Developer Unit in the Printer
3. After the developer unit is on the black plastic guide and has cleared the upper part of the
printer, push it all the way into the printer. The developer unit will not lock into place until
you close the latch at the end of this procedure.
you close the latch at the end of this procedure.
4. If you have any toner on your hands, clean it off.
5.6.12 Install the OPC Module
1. Grasp the OPC module by its plastic handle, and put the OPC module back in the printer. Fit
1. Grasp the OPC module by its plastic handle, and put the OPC module back in the printer. Fit
the guides on the top of the OPC module into the metal channel on the printer. See Figure 5-
24.
Caution: Avoid exposing the surface of the OPC drum to ambient light for more than five
minutes. Exposing the OPC drum to light for an extended period will degrade the
photoconductors.
photoconductors.
Caution: Avoid touching the OPC drum, as touching it may contaminate the surface and
degrade the print quality.
2. After the OPC is in place, press in on the main charger to be sure that it is properly seated.
100