Printronix l7032 Manual De Usuario

6.2.2 No Image – No Toner on Paper (White Page)

developer mix? If you have an

unopened bag of developer mix in the kit containing the developer unit you installed, install

and

. Make sure that all consumables are installed in the printer.

umables are within their expected lifespan by checking the

information in the maintenance & service log. Replace any consumable that has been in use

eplace the transfer charger unit with a new transfer charger unit.

the electrical connectors are damaged, call a service technician.

. Check the gear coupling between the developer unit and the main drive assembly:

If th

e main drive assembly or the gear on the developer unit is damaged, call a

ervice technician.

1. If you just installed a new developer unit, did you install the

the developer mix.

Follow the instructions in:
• Section 4.10

Make sure that all cons

longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.

4. Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedure and 5.6 Mont

While you are cleaning the transfer charger unit, make sure that the corona wires are not
broken. If they are broken, r

5. Make sure developer unit is installed correctly. Remove it from the printer.

and

6. While you have the developer unit out of the printer, check the electrical connectors between

the developer unit and the printer. See Figure 6-1 and Figure 6-2.

• Check the developer unit’s gear. See Figure 6-1.

• Look inside the printer and check the gear that drives the gear on the developer unit. See

Figure 6-2.

e gear on th

108