Printronix l7032 Manual De Usuario
Chapter 3
Paper Loading
3.1 Contents
This chapter contains the following sections:
• 3.2 Recommended Media
• 3.2 Recommended Media
• 3.3 Storing Paper
• 3.4 Loading Paper
3.2 Recommended Media
The printer works with a large variety of media. Recommended media consist of:
• Continuous fanfold 16-42 lb. (60-158 grams per square meter - gsm) paper
• Continuous fanfold 16-42 lb. (60-158 grams per square meter - gsm) paper
• Matrix-on label stock
• Card stock
• Tag stock
Paper width should be 6.5 to 15 inches pin to pin.
The length of each form should be 3 to 33 inches in 1/8 inch or 1/6 inch increments.
Paper weight of 20-24 lb. (75-90 gsm) produces the best print quality.
Important: To ensure that label stock and other non-standard media will provide the print
quality you want, always order and test a small quantity of the media before
purchasing a large quantity.
purchasing a large quantity.
If possible, avoid label stock with the matrix removed. Although the printer will print labels with
the matrix removed, you may encounter occasional printing problems. These labels have a
tendency to peel and cause paper jams.
3.3 Storing Paper
The best way to store paper is in the original packaging in a cool, dry area.
Avoid storing paper on the floor where it can pick up moisture from spills, floor cleaning, and so
on. Moist paper can damage the printer and its consumables.
on. Moist paper can damage the printer and its consumables.
You should store paper and other media in the same environment as the printer. The printer
gives the highest print quality when both printer and media have the same relative humidity and
temperature.
45