Printronix L5535 Manual De Usuario
Chapter 6
System Status And Error Messages
224
Any pages left in the printer at the time of failure will not be
reprinted. Data is lost. (you will need to reprint the lost pages
according to your application software.)
reprinted. Data is lost. (you will need to reprint the lost pages
according to your application software.)
If Reprint on Fault is
confirm:
The control panel on the printer returns a message asking whether
or not to reprint. Answer Yes to reprint, answer No if a reprint is not
necessary.
or not to reprint. Answer Yes to reprint, answer No if a reprint is not
necessary.
Whether Reprint on Fault is enabled or disabled, or confirm:
After a paper jam, you may need to reload the paper onto the
tractors.
tractors.
Table 6, “Error Messages,” on page 228, designates those errors
that require reprinting to recover from an error condition.
that require reprinting to recover from an error condition.
NOTE: Some errors require reprinting, regardless of your printer
configuration.
Procedure For Fault Clearing - Reprint On Fault
Disabled
1.
A fault occurs.
2.
Correct the fault condition.
3.
Press CLEAR.
4.
The STAND BY LED blinks and the following message appears
while the printer attempts to clear the fault:
while the printer attempts to clear the fault:
•
If the fault is not cleared:
a.
The printer beeps and briefly displays the following
message:
message:
b.
The printer then redisplays the original fault message, or
any other uncleared fault message.
any other uncleared fault message.
Standby ...
Clearing Fault
Clearing Fault
Faults Not Cleared