Printronix P7000 Manual De Usuario

57

You can optimize print quality for darker and sharper barcodes and 
characters. Doing so, however, will decrease the printer speed.

To optimize print quality, you can change the values of the following 
configuration parameters:

•

Bar Code Quality (Printer Control menu): Select “Dark” or 
“Recommended.” Recommended prints the darkest images, but at the 
slowest speed. Dark prints at a faster speed than Recommended, but the 
characters are not as dark. (See page 219 for a written description of Bar 
Code Quality.)

•

Print Quality (IGP/PGL emulation): Select “Best” or “High.” Best prints 
the darkest images, but at the slowest speed. High prints at a faster 
speed than Best, but the characters are not as dark. (See page 177 for 
the IGP/PGL Configuration Menu, and see page 186 for a written 
description of Print Quality.)

•

Print Quality (IGP/VGL emulation): Select “High.” (See page 190 for the 
IGP/VGL Configuration Menu, and see page 197 for a written description 
of Print Quality.)

22.

Save Config.
TEST

TEST now appears as one of configuration 
choices.

23.

Saving Configuration

Save Config.
TEST*

Your configuration is saved as TEST.

24. ENTER 

SWITCH

LOCKED

Locks the ENTER key.

25. ONLINE

Ribbon Life = 100%

Now you have the saved configuration for later use if needed.

ENTER

+

ON LINE/CLEAR