Printronix SL4M Manual De Referencia
Admin User Menu Items (SL4M)
45
NOTE: The
x in the error messages represents a number code that
identifies the area in the printer software or RFID encoder
where the failure occurred.
where the failure occurred.
Custom Setting
This menu item contains submenus that allow the RFID encoder to
work with tag types that are not listed in the Tag Type menu item.
work with tag types that are not listed in the Tag Type menu item.
NOTE: Printronix cannot guarantee the performance of tag types
not certified by Printronix.
Custom Setting Submenus
Custom Tag
This menu item enables or disables the Custom Setting submenus.
The default is Disable.
The default is Disable.
When Custom Tag is set to Disable, the settings in the Custom
Setting submenus are ignored by the RFID encoder.
Setting submenus are ignored by the RFID encoder.
When it is set to Enable, the RFID encoder uses the settings in the
Custom Setting submenus, which must be set to match the
characteristics of the custom tag.
Custom Setting submenus, which must be set to match the
characteristics of the custom tag.
When it is set to Duplicate, the settings of the selected Tag Type
menu item are copied into the Custom Setting submenus, but are
ignored by the RFID encoder.
menu item are copied into the Custom Setting submenus, but are
ignored by the RFID encoder.
Table 4. Printed Overstrike Error Messages
Error Message
Explanation
Tag R/W Err
x
Check media
The printer software attempted to write to or read from the
RFID tag, but the RFID encoder indicated that the tag could
not be written to or read from.
RFID tag, but the RFID encoder indicated that the tag could
not be written to or read from.
Tag Comm Err
x
Check cable
The printer software temporarily lost communication with the
RFID encoder, or communication between the printer
software and the RFID encoder was not synchronized and
had to be forced.
RFID encoder, or communication between the printer
software and the RFID encoder was not synchronized and
had to be forced.