HTC droid eris Guía Del Usuario
32 Phone Basics
To remove the storage card
Press the storage card in to eject it from the slot.
Note
If you want to remove the storage card while the phone is on, see
“To remove the storage card while the phone is on” later in this chapter.
“To remove the storage card while the phone is on” later in this chapter.
1.3 Charging the Battery
New batteries are not charged when shipped. Before you start using
your phone, you need to install and charge the battery. Some batteries
perform best after several full charge/discharge cycles.
your phone, you need to install and charge the battery. Some batteries
perform best after several full charge/discharge cycles.
To charge the battery
1. Connect the USB connector of the Charging Cable to the sync
connector on the bottom of your phone.
2. Connect the other end of the Charging Cable to the AC Charger.
3. Select the AC Charger plug adapter that is appropriate for your
3. Select the AC Charger plug adapter that is appropriate for your
locale and insert it into the AC Charger.
AC charger
adapter plug
4. Plug in the AC Charger to an electrical outlet to start charging
the battery.
Note
Only the AC adapter and USB cable provided with your phone must be
used to charge the battery.
used to charge the battery.