Toshiba M6-EZ6611 Guía Del Usuario

210

5.375 x 8.375 ver 2.3

own I/O base address. See 

 for more information.

Since all PC Cards share the same socket, each card is not 
required to have its own address.

Hot swapping (removing one PC Card and inserting 
another without turning the computer off) fails.

Follow this procedure before you remove a PC Card:

Double-click the Safely Remove Hardware icon on the 
System tray.

Select the item you wish to remove.

Click Stop.

Remove the device when prompted to do so.

Click OK three times to close the Safely Remove 
Hardware screen.

Never swap modules when the computer is in Hibernation or 
Standby mode. This is known as “warm swapping” and is not 
supported with this computer. For more information on 
Hibernation and Standby modes see 

 and 

.

The system does not recognize your PC Card.

Refer to the PC Card documentation.

Removing a malfunctioning card and reinstalling it can 
correct many problems. 

Reinsert the card to make sure it is properly connected.

If the card is attached to an external device, check that the 
connection is secure.