Toshiba sd-v395kc Manual De Propietario

The screen saver operates when you leave the unit in 

DVD stop mode for approx. five minutes.

The DVD VIDEO logo moves randomly on the screen.

Screen Saver function is invalidated.

Screen Saver function is made effective.

On screen display can be switched on or off when you 

press any buttons.

Off:   On screen displays do not appear when you 

press any buttons.

On:   On screen displays appear when you press 

any buttons (factory setting).

There are two types of source content in pictures 

recorded in DVD video discs: film content (pictures 

recorded from films at 24 frames per second) and 

video content (video signals recorded at 30 frames per 

second). Make this selection according to the type of 

content being viewed.

Auto:  Select this selection normally.

 

The DVD player automatically detects 

source content, film or video of playback 

source, and converts that signal in the 

progressive output format in an appropriate 

method.

Film:  The DVD player converts film content 

pictures in the progressive output format 

appropriately. Suitable for playback of film 

content pictures. The progressive output 

feature will be most effective under this 

selection. 

Video:  The DVD player filters video signal, and 

converts it in the progressive output format 

appropriately.

 

Suitable for playback of video content 

pictures. 

Depending on the disc, pictures may be cut off or doubled. In 

this case, select “Video”.

You can continuously playback all JPEG files 

automatically.

After the selection below, the disc will start playback on 

JPEG files which have been recorded.

Plays back one file at a time.

Plays back images in the form of a slide show at 5 

second intervals.

Plays back images in the form of a slide show at 10 

second intervals.

Plays back images in the form of a slide show at 15 

second intervals.

Night Mode enables you to control the dynamic range so 

as to achieve a suitable sound for your equipment.

Off:  It plays back at the recording level on the disc.

On:  Loud sound such as explosion is toned down 

slightly when played back. This is suitable 

when it is connected to a stereo. 

This function works only when the disc recorded with 

Dolby Digital is played back. 

The level of Night Mode may differ depending on DVD 

video disc.

•

•

This DVD video player equipped with a “QSound”. It can 

produce the effect of being in a cinema or a concert hall.

Off:  The QSound is disengaged.

On:  The QSound operates.

The QSound setting can also be changed with AUDIO on 

the remote control 

.

This function works only when the disc recorded with 

Dolby Digital is played back. 

When this function works, the volume might changed. 

When the voice is distorted, turn off QSound. 

•

•

•

•

You can select the digital output sound format corresponding 

to your system connection.

Change Dolby Digital to PCM for the output.

Select when connected to a 2 channel digital stereo 

amplifier.

Disc audio bitstream data will be output.

There is no sound output from DIGITAL AUDIO 

OUT jack.

Even if you select “Bitstream”, MPEG Audio will be output

in PCM format.

Some discs are specified as not suitable for children. 

Such discs can be limited not to playback with the unit.
1) Press ▲ or ▼ to select “Parental”, then press    

ENTER. “Enter Password” screen will appear.

2) Press “0000” using Number buttons (0–9).    

(Please note, this is pre-setting password of this unit). 

Then press ENTER. The parental level list will appear. 

• Level Off:  The parental control setting does not 

function.

• Level 8:  Virtually all DVD software can be played 

back.

• Level 1:  DVD software for adults cannot be played 

back. 

3) Press ▲ or ▼ to select from the level 1 to level 8.  

Then press ENTER. The limitation will be more severe 

as the level number is lower.

4) Press OPEN/CLOSE to activate Parental control  

setting.

2K60121A.indb   42

2K60121A.indb   42

1/12/2007   3:50:20 PM

1/12/2007   3:50:20 PM