Toshiba 1100-s101 Guía Del Usuario

96

5.375 x 8.375 ver 2.3

❖

Reverse Polarity should be avoided with all batteries. The 
main battery is designed so that it cannot be installed in 
reverse polarity. 

❖

Charge the battery pack only in the computer.

❖

When you install the battery pack, you should hear a 
click when it is inserted properly.

❖

Do not expose the battery pack to fire. The battery pack 
could explode.

To maximize the life of your battery pack:

❖

At least once a month, disconnect the computer from a 
power source and operate it on battery power until the 
battery pack fully discharges. Before doing so, follow the 
steps below:

Turn off the computer’s power.

Disconnect the AC adaptor and turn on the 
computer’s power. If it does not turn on, go to step 4.

Operate the computer on battery power for five 
minutes. If the battery pack has at least five minutes 
of operating time, continue operating until the battery 
pack is fully discharged. If the battery light LED 
flashes or there is some other warning to indicate a 
low battery, go to step 4.

Connect the AC adaptor to the computer and the 
power cord to a power outlet. The DC-IN or AC 
power-light LED should glow green, and the Battery 
LED should glow amber to indicate that the battery 
pack is being charged. If the DC-IN or AC power-
light indicator does not glow, power is not being 
supplied. Check the connections for the AC adaptor 
and power cord.

Charge the battery pack until the Battery LED glows 
green.