Toshiba tdp-xp1u Guía Del Usuario

38

Align the orientation, press down the new lamp 
until the bottom is reached, and lock in place using 
the two lamp locking screws.

Align the cover, and press it in, then tighten the
screws loosened in step 

 until the lamp cover 

is no longer loose. (Be sure to replace the lamp 
cover.)

See the lamp’s manual for instructions on resetting 
the lamp time.

•  The

[Lamp time] item in the Status display menu indicates the time of lamp use (as a 

•  It is recommended that the lamp be replaced after 3,000 hours of use.When

time] reaches 3,000 hours, a message will appear. (After 3,000 hours, the message will 

appear when the power is first turned on after each 100 hour period of use.) This display 
disappears when you press the   button.

•  Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

projector may fail to be powered on or the lamp may fail to come on.

•  Always replace the lamp with a new one.
•  The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

This projector’s lamps contain trace amounts of environmentally harmful inorganic mer-
cury. Be careful not to break used lamps, and dispose of them in accordance with local 
regulations.

2

1