Toshiba 50hp82 Manual De Propietario

36

When the picture input from the RGB3 input terminal is
distorted, select the most appropriate setting from among
“1,” “2,” and “3.”

Example: Setting “2”

1. Use the ▲ and ▼ buttons to select “FUNCTION,”

then press the PROCEED button.
The “FUNCTION” screen appears.

2. Use the ▲ and ▼ buttons to select “RGB3 ADJ.”

3. To select “2”...

Use the 

 and 

 buttons to select “2.”

The mode switches as follows each time the 

 or 

buton is pressed:

→

↔

↔

←

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.

The position of the menu display will change. In such
a case, be sure to adjust the position.

Select  “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.

Example: Setting “PLE” to “LOCK”

1. Use the ▲ and ▼ buttons to select “FUNCTION,” then

press the PROCEED button.
The “FUNCTION” screen appears.

2. Use the ▲ and ▼ buttons to select “LONG LIFE,” then

press the PROCEED button.

The “LONG LIFE” screen appears.

3. Use the ▲ and ▼ buttons to select “PLE.”

4. Use the 

 and 

 buttons to select “LOCK.”

The mode switches as follows each time the 

 or 

button is pressed:

 ↔