Toshiba cz19t31 Guía De Operación
15
Set up
Preparation
Basic Operation
Advanced Operation
Reference Selection
MENU
TV/VIDEO
VOLUME
CHANNEL
POWER
T
S
t
s
Watching TV Programs or Video input
Selecting the TV channels
Select a channel in one of the following two ways.
●
To scan the memorized channels in numerical sequence
Press CHANNEL s to select the next higher channel.
Press CHANNEL t to select the next lower channel.
Press the button again to select the next memorized channels.
Press CHANNEL t to select the next lower channel.
Press the button again to select the next memorized channels.
●
To select a channel directly
Press the
Press the
Channel Number
buttons (0-9 and 100).
To select channel 4, press “4” (or press “0”, “4”).
To select channel 38, press “3”, “8”.
To select channel 125, press “100”, “2”, “5” in sequence.
To select channel 38, press “3”, “8”.
To select channel 125, press “100”, “2”, “5” in sequence.
If you cannot select certain channels, either TV (off the air) or
CABLE channels
Check if the TV/CABLE function is properly set. See page 13.
CABLE channels
Check if the TV/CABLE function is properly set. See page 13.
Selecting the video input source
You can use the TV/VIDEO button to view signal coming from other
devices, such as VCRs or video disc players that may be connected to your
TV. (See “Connecting Your TV” on page 4.)
devices, such as VCRs or video disc players that may be connected to your
TV. (See “Connecting Your TV” on page 4.)
Note: To operate your TV and video equipment properly, refer to the instructions
furnished with the video equipment.
1
Turn the TV and the video equipment ON.
2
Press TV/VIDEO on the Remote Control or
on the TV to select “VIDEO”.
The selected source will be displayed in
purple.
on the TV to select “VIDEO”.
The selected source will be displayed in
purple.
CHANNEL
t
/
s
TV
CABLE
VCR
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL
MUTE
CH
CH
VOL
VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
REW
FF
SLOW PAUSE
STOP
PLAY
REC TV/VCR
TV/VIDEO
FAV CH
A
EXIT
Channel
Number
Number
CHANNEL
s
/
t
TV/VIDEO
TO SELECT PUSH TV/VIDEO
VIDEO
TV
3
Operate the video equipment normally.
About the Demonstration Mode
When this function is activated, your TV will automatically display a variety
of its on-screen menus and special features. This function is provided for
demonstration purpose only.
of its on-screen menus and special features. This function is provided for
demonstration purpose only.
1
Press MENU, then s or t until “DEMO”
in the Option menu is displayed in purple.
in the Option menu is displayed in purple.
2
Press T or S to select “START”.
The on-screen demonstration will start after
about 15 seconds.
about 15 seconds.
To stop the demonstration
Press EXIT or RECALL on the Remote or select “STOP” in the menu.
Press EXIT or RECALL on the Remote or select “STOP” in the menu.
LANGUAGE:[ENGLISH]FRANCAIS
DEMO:
C.CAPT:
ESPANOL
[START]STOP
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
MOVE[s t] SELECT[T S]
T/S
t/s
POWER
TV/VIDEO