Quantum acl 4 Instruccion De Instalación

Appendix B Supplemental Installation Procedures
Defining the Library Power-Up State

ACL 4/52 Facilities Planning and Installation Guide

Defining the Library Power-Up State

You have the option of defining the starting condition of the library,
either

On-line

or standby (

Off-line

), after power-up, self-tests and

initialization has occurred. The default is

On-line

. You can change it by

using the

Power-Up State

sub-menu as follows:

Press and release the Control Panel

STANDBY

button and verify

that the SDA shows

System Off-line

Press and release the

SELECT

button to enter the Menu Mode.

Verify that the following is displayed in the SDA:

Press and release the

SELECT

button to choose the

Configuration

menu.

Verify that the following is displayed in the SDA:

Use the

↓

button to bypass the

SCSI Address

menu and verify that

the following is displayed in the SDA:

Press and release the

SELECT

button to choose the

Power-Up State

menu and verify that the following is displayed in the SDA:

Note: System On-line

is the default. If you want to change the power-up

state to standby mode (

System Off-line

), proceed to Step 8. Otherwise,

exit the menu mode.

Use the

↓

button to bypass the

On-Line

option and verify that the

following is displayed in the SDA:

With the desired option displayed on Line #2, press and release the

SELECT

button.

M e n u :

C o n f i g u r a t i o n . .

M e n u : C o n f i g u r a t i

I n q u i r y

M e n u : C o n f i g u r a t i

Po w e r - U p S t a t e

M e n u : Po w e r - U p

O n - L i n e <

M e n u : Po w e r - U p

S t a n d b y