Quantum sdlt 220 Guía Del Usuario
81-85002-01
March 2004
4-1
CHAPTER 4
Installing Your Tape Drive
This chapter describes how to install the internal tape drive into a system. This
includes configuration jumper settings, connector pin assignments, installation
instructions, power and signal cabling descriptions, and operating instructions.
This chapter also includes information on configuring and connecting the tabletop
version of the drive into a system.
includes configuration jumper settings, connector pin assignments, installation
instructions, power and signal cabling descriptions, and operating instructions.
This chapter also includes information on configuring and connecting the tabletop
version of the drive into a system.
This chapter covers the following topics:
•
describes appropriate guidelines
when working with the tape system.
•
describes proper steps to take before the drive is
installed in a system. This includes recording the model and serial numbers,
checking that the proper SCSI controller and cable have been delivered and
checking the drive for proper operation before installing it into a system.
checking that the proper SCSI controller and cable have been delivered and
checking the drive for proper operation before installing it into a system.
•
describes how to
configure and install an internal tape drive into a system.
•
describes how to configure and
install the tabletop version of the tape drive.
•
describes how to confirm that the drive has been
installed correctly.