Quantum sdlt 220 Guía Del Usuario
CHAPTER 5: Using Your Tape Drive
SDLT 220 and SDLT 320 Product Manual
5-10
March 2004
81-85002-01
5.5
Front Panel Controls and LEDs
All controls and LEDs are located on the tape drive’s front panel. See
for details. Control and LED functionality are described in
. Use these controls and LEDs to operate the tape system and monitor
the tape system’s activities.
This section also describes the behavior of the amber-colored LED (formerly Write
Protect) on the SDLT 320 drive. This LED is now defined as the Density Indicator,
as shown in
Protect) on the SDLT 320 drive. This LED is now defined as the Density Indicator,
as shown in
Table 5-2.
Behavior of the Amber LED When a Tape Cartridge is Loaded
Cartridge Type
SDLT 220
SDLT 320*
DLTtape IV [includes DLT 1
(Benchmark)]
(Benchmark)]
LED is illuminated
LED is not illuminated
Super DLTtape I
LED is not illuminated
LED is illuminated for other
reasons
reasons
‡
* Firmware revision V45 or higher.
‡ Amber LED is used as a Density Indicator on SDLT 320.