Net Media nm-pocball Guia De Especificaciones

MAN-POCBALL     REV0703A

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com

Figure 2 - Connecting the camera to multiple pieces of video equipment. Every piece except the last must have a 

loopback or video output jack.

Figure 3 - Connecting the camera to a modulator for whole house distribution and standard television viewing on 

the modulated channel. The modulator can also be the last piece of equipment in Figure 2.

Distribution 

Panel

 or Splitter

Splitter/

Combiner

Installation Procedures:

1.  Connect  a  coax  cable  (RG6  recommended)  to  the  F-connectors  of  the  camera  and  Video  Decoder.  Each 

Camera/Decoder pair needs a dedicated point-to-point wiring circuit. Do not connect the Camera/Decoder coax to 
video distribution equipment! Doing so could damage this product and/or the other attached devices!

2. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the Decoder’s RCA Video 

Out Connector. Simple adapters, such as RCA to BNC, may be used where appropriate.

3. Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder’s Power Input Connector.
4.  Mount  the  Base  to  the  junction  box  (not  included)  and  adjust  the  camera  assembly  for  proper  viewing.  When 

satisfied, secure all adjustment points.

Figure 1 - Connecting the camera to a security monitor or standard television. Use the TV’s composite RCA Video In 

jack and view through its video or line input. The picture will not be available on a channel.