Sony STR-DA2400ES Guía Del Usuario
92
GB
D:\Chin Meng's job\SONY-HA\CEL\3289204422\04GB-STRDA2400ESUC\090OTH_GB.fm
masterpage: Left
STR-DA2400ES
3-289-204-42(2)
3-289-204-42(2)
G DTS/
DTS-ES/
DTS 96/24
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when
the receiver is decoding
DTS-ES signals.
“DTS 96/24” lights up
when the receiver is
decoding DTS 96/24 (DTS
96 kHz/24 bit) signals.
Note
receiver is decoding DTS
signals.
“DTS-ES” lights up when
the receiver is decoding
DTS-ES signals.
“DTS 96/24” lights up
when the receiver is
decoding DTS 96/24 (DTS
96 kHz/24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 87).
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 87).
H D.RANGE
Lights up when dynamic
range compression is
activated.
range compression is
activated.
I SP A/SP B/
SP A+B
Lights up according to the
speaker system used
(page 44). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
speaker system used
(page 44). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
J Tuner
indicators
Lights up when using the
receiver to tune in radio
stations, etc.
Note
receiver to tune in radio
stations, etc.
Note
“RDS” appears for models of
area code CEL, CEK, ECE
only.
area code CEL, CEK, ECE
only.
K SLEEP
Lights up when the sleep
timer is activated.
timer is activated.
L A.DIRECT Lights up when the receiver
is processing Analog Direct
signals.
signals.
M MEM
Lights up when a memory
function, such as Preset
Memory etc., is activated.
function, such as Preset
Memory etc., is activated.
Name
Function
N ; PL/
; PL II/
; PL IIx
; PL IIx
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel
signals in order to output
the center and surround
channel signals.
“; PL II” lights up when
the Pro Logic II decoder is
activated.
“; PL IIx” lights up when
the Pro Logic IIx decoder is
activated.
However, these indicators
do not light up if both the
center and surround
speakers are not connected
and you select a sound field
using the A.F.D. button.
Note
receiver applies Pro Logic
processing to 2 channel
signals in order to output
the center and surround
channel signals.
“; PL II” lights up when
the Pro Logic II decoder is
activated.
“; PL IIx” lights up when
the Pro Logic IIx decoder is
activated.
However, these indicators
do not light up if both the
center and surround
speakers are not connected
and you select a sound field
using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
does not function for signals
with a sampling frequency of
more than 48 kHz.
O BI-AMP
Lights up when BI-AMP
Speaker setting is set to
“ON”.
Speaker setting is set to
“ON”.
P EQ
Lights up when the
equalizer is activated.
equalizer is activated.
Q NEO:6
Lights up when DTS Neo:6
Cinema/Music decoding is
activated.
Cinema/Music decoding is
activated.
R DTS-HD
MSTR/
DTS-HD HI
RES
DTS-HD HI
RES
“DTS-HD MSTR” lights up
when the receiver is
decoding DTS-HD Master
Audio signals.
“DTS-HD HI RES” lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
when the receiver is
decoding DTS-HD Master
Audio signals.
“DTS-HD HI RES” lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
S LPCM
Lights up when Linear
PCM signals are detected.
PCM signals are detected.
Name
Function