Sony str-da4600es Guía Del Usuario

You can adjust the distance from the seating 
position to each speaker (front left/right, 
center, surround left/right, surround back left/
right, front high left/right, subwoofer.)

Select the speaker on the screen for 
which you want to adjust the distance 
from the seating position, then press 

.

Select a “Distance:.”

Set the distance of the selected 
speaker, then press 

.

You can adjust the distance from 1.0 meter 
to 10.0 meters (3 feet 3 inches to 32 feet 
9 inches)  in  1 cm  (1 inch)  steps.

You can adjust each speaker’s (front left/right, 
center, surround left/right, surround back left/
right, front high left/right) size.

Select the speaker on the screen for 
which you want to adjust the size, then 
press .

Select a “Size:.”

Set the size of the selected speaker, 
then press 

.

• Large

If you connect large speakers that will 
effectively reproduce bass frequencies, 
select “Large.” Normally, select “Large.”

• Small

If the sound is distorted, or you feel a lack 
of surround effects when using multi-
channel surround sound, select “Small” to 
activate the bass redirection circuitry and 
output the bass frequencies of each 
channel from the subwoofer or other 
“Large” speakers.

• The “Large” and “Small” settings for each speaker 

determine whether the internal sound processor 
will cut the bass signal from that channel.
When the bass is cut from a channel, the bass 
redirection circuitry sends the corresponding bass 
frequencies to the subwoofer or other “Large” 
speakers.
However, since bass sound has a certain amount of 
directionality, it is best not to cut it, if possible. 
Therefore, even when using small speakers, you 
can set them to “Large” if you want to output the 
bass frequencies from that speaker. On the other 
hand, if you are using a large speaker, but prefer not 
to have bass frequencies output from that speaker, 
set it to “Small.”
If the overall sound level is lower than you prefer, 
set all speakers to “Large.” If there is not enough 
bass, you can use the equalizer to boost the bass 
levels.

• The surround back will be set to the same setting as 

that of the surround speakers.

• When the front speakers are set to “Small,” the 

center, surround, surround back, and front high 
speakers are also automatically set to “Small.”

• If you do not use the subwoofer, the front speakers 

are automatically set to “Large.”

Lets you set the bass crossover frequency of 
speakers that has been set to “Small” in the 
Speaker menu. Measured speaker crossover 
frequency is set for each speaker after auto 
calibration.