Sony STR-DA5600ES Guía Del Usuario
100
GB
1
Turn on the main receiver (this
receiver).
receiver).
2
3
Press ZONE.
The remote switches to zone 2.
4
Press ?/1.
The zone function is activated.
5
Press MENU.
The menu is displayed on the TV screen.
6
Select “
Input” from the
menu, then press
or
b.
7
Select the input source you
want, then press
want, then press
.
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
8
Adjust to a suitable volume.
• In the case of illustration 1-1
(page 94), adjust the volume using
MASTER VOL +/– on the remote.
MASTER VOL +/– on the remote.
• In the case of illustration 1-2
(page 95), adjust the volume using the
receiver in zone 2. If you set “Zone2
Line Out Level” to “VARIABLE,” you
can also adjust the volume using
MASTER VOL +/– on the remote
(page 98).
receiver in zone 2. If you set “Zone2
Line Out Level” to “VARIABLE,” you
can also adjust the volume using
MASTER VOL +/– on the remote
(page 98).
To finish the zone 2 operation
Press ZONE, then press ?/1.
1
Turn on the main receiver (this
receiver) and the amplifier in
zone 3.
receiver) and the amplifier in
zone 3.
2
Press ZONE.
The remote switches to zone 3. Change
the zone setting of the remote to zone 3 in
advance (page 99).
the zone setting of the remote to zone 3 in
advance (page 99).
3
Press ?/1.
The zone function is activated.
4
Press one of the input buttons
on the remote to select the
source signals you want to
output.
on the remote to select the
source signals you want to
output.
For zone 3, only analog audio signals are
output. When you select SOURCE, the
signals of the current input in main zone
are output.
output. When you select SOURCE, the
signals of the current input in main zone
are output.
5
Adjust to a suitable volume
using the receiver in zone 3.
using the receiver in zone 3.
To finish the zone 3 operation
Press ZONE, then press ?/1.
Tips
• Even when this receiver is standby mode (press
?/1 on the remote to turn off this receiver), the
receiver in zone 2 or zone 3 remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
multifunction remote at the same time (SYSTEM
STANDBY).
receiver in zone 2 or zone 3 remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
multifunction remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
OUT/ZONE 3 OUT jacks. No signals are output
from components connected to only the digital
input jacks.
OUT/ZONE 3 OUT jacks. No signals are output
from components connected to only the digital
input jacks.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi-channel input is selected.
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi-channel input is selected.
• The TV input, phono input, or multi-channel input
can be selected in the main zone only.
Operating the receiver from
zone 2
zone 2
Operating the receiver from
zone 3
zone 3