Intel Pentium III BX80525U450512E Hoja De Datos
Los códigos de productos
BX80525U450512E
54
Datasheet
S.E.C.C. and S.E.C.C.2 Mechanical Specifications
5.0
S.E.C.C. and S.E.C.C.2 Mechanical Specifications
Pentium III processors use either S.E.C.C. or S.E.C.C.2 package technology. Both package types
contain the processor core, L2 cache, and other passive components. The cartridges connect to the
baseboard through an edge connector. Mechanical specifications for the processor are given in this
section. See
contain the processor core, L2 cache, and other passive components. The cartridges connect to the
baseboard through an edge connector. Mechanical specifications for the processor are given in this
section. See
for a complete terminology listing.
5.1
S.E.C.C. Mechanical Specifications
S.E.C.C. package drawings and dimension details are provided in
through
through
show the package dimensions;
show the extended
and
provide details of the processor substrate
edge finger contacts.
contain processor marking information. See
for S.E.C.C.2 mechanical specifications.
The processor edge connector defined in this document is referred to as the “SC242 connector.”
See the Slot 1 Connector Specification (Document Number 243397) for further details on the
SC242 connector.
See the Slot 1 Connector Specification (Document Number 243397) for further details on the
SC242 connector.
Note:
through
, the following apply:
1. Unless otherwise specified, the following drawings are dimensioned in inches.
2. All dimensions provided with tolerances are guaranteed to be met for all normal production
product.
3. Figures and drawings labeled as “Reference Dimensions” are provided for informational
purposes only. Reference Dimensions are extracted from the mechanical design database and
are nominal dimensions with no tolerance information applied. Reference Dimensions are
NOT checked as part of the processor manufacturing. Unless noted as such, dimensions in
parentheses without tolerances are Reference Dimensions.
are nominal dimensions with no tolerance information applied. Reference Dimensions are
NOT checked as part of the processor manufacturing. Unless noted as such, dimensions in
parentheses without tolerances are Reference Dimensions.
4. Drawings are not to scale.
Figure 22. S.E.C.C. Packaged Processor — Multiple Views
Left
Right
Right
Side
Left
Right
Thermal Plate
Side View
Cover Side view
Top View
Left Latch
Right Latch
Cover
Thermal
Plate