Sony rdr-vx521 Guía Del Usuario
25
H
ook
ups
and
Se
tti
tti
n
gs
“4:3 Letter Box”: For standard TVs.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “Video Settings (Video)” on
page 100.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “Video Settings (Video)” on
page 100.
14
Press ENTER.
The setup display for selecting the type of
Dolby Digital signal appears.
Dolby Digital signal appears.
15
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
16
Press ENTER.
The setup display for selecting the type of
DTS signal appears.
DTS signal appears.
17
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
decoder, select “On.” Otherwise, select “Off.”
18
Press ENTER when “Finish” appears.
Easy Setup is finished. All connections and
setup operations are complete.
If you use the cable box/satellite receiver
control, check that the control works correctly
(page 25).
setup operations are complete.
If you use the cable box/satellite receiver
control, check that the control works correctly
(page 25).
To return to the previous display
Press O RETURN.
z
Hint
If you want to run Easy Setup again, select “Easy Setup”
in the “Setup” display (page 108).
in the “Setup” display (page 108).
Note
To record TV programs using the timer, you must set the
clock accurately.
clock accurately.
Checking the cable box/satellite
receiver control setting
receiver control setting
1
Turn on the recorder and the cable box/
satellite receiver.
satellite receiver.
2
Point the recorder’s remote at the recorder
(not at the cable box/satellite receiver).
(not at the cable box/satellite receiver).
3
Press CH +/– and check that the channel
changes on the cable box/satellite receiver
window.
changes on the cable box/satellite receiver
window.
4
Press the number buttons and check that
the channel changes on the cable box/
satellite receiver window.
the channel changes on the cable box/
satellite receiver window.
If you cannot get the recorder to control your
cable box/satellite receiver
cable box/satellite receiver
Check the settings at “Set Top Box Control” in
“Features” setup (page 105).
Check the connection and place the set top box
controller near the cable box/satellite receiver
(page 12).
“Features” setup (page 105).
Check the connection and place the set top box
controller near the cable box/satellite receiver
(page 12).
D-PCM
Dolby Digital
Easy Setup
Dolby Digital
10:10 AM
No Disc
On
Off
Easy Setup
DTS
10:10 AM
No Disc
Finish
Easy Setup
Easy Setup is finished.
10:10 AM
No Disc
,continued