GCC 12 Manual De Usuario

8

1.

Switch off the printer.

2.

Unplug the interface cables from the back of

the printer. Do not unplug the power cord from

the AC outlet.

3.

If necessary, move the printer so that you have

clear access to its left side.

4.

Remove the side cover. Unscrew the two

thumbscrews at the rear of the printer, as

shown. If these are tight, you may need to use

a #2 Phillips screwdriver.

5.

Slide the left cover assembly towards the rear

of the printer. Swing out the bottom edge first

and then lower the left cover out of the guide

channel.