GCC 12n Guía De La Red
22
• My PostScript jobs print correctly, but an error page prints at the end of
every job.
This error is similar to the previous error. If your print job is sent from a Windows
computer, this machine may be sending a Control-d (^d) character at the end of the
file; this causes a PostScript error, but the error only occurs after the job has printed
successfully. See the section “Control-d and PostScript printing” in the section “Con-
figuring Windows computers that will print to your NEST printer.”
computer, this machine may be sending a Control-d (^d) character at the end of the
file; this causes a PostScript error, but the error only occurs after the job has printed
successfully. See the section “Control-d and PostScript printing” in the section “Con-
figuring Windows computers that will print to your NEST printer.”
• I changed the frametype and now my printer won’t connect to the file
server.
When you change the frametype, you are also changing the network number of the
printer. Since the internal print server is now on a different network, NetWare thinks
that it is a different print server, even though it has the same name. Since NetWare
doesn’t allow more than one print server at a time to use the same name, you must
wait a few minutes until the network realizes that the old print server is no longer
running.
printer. Since the internal print server is now on a different network, NetWare thinks
that it is a different print server, even though it has the same name. Since NetWare
doesn’t allow more than one print server at a time to use the same name, you must
wait a few minutes until the network realizes that the old print server is no longer
running.
(You should only have this problem if the print server was already connected to a file
server and you did not change the print server name when you changed the
frametype.)
server and you did not change the print server name when you changed the
frametype.)