Allworx 9224 Guía Del Usuario

5  Phone Operation 

5.1  Placing a Call 

•  Outbound calls can be placed by pressing the following PFKs: 

o

  Call Appearance: can be used to place extension-to-extension calls or to obtain an outside line 

(must dial 9 first). 

o

  Line Appearance: seizes the outside line without dialing 9 first. 

o

  Speed Dial: automatically dials the programmed number 

5.2  Receiving a Call 

•  Inbound calls can be answered with the following PFKs (when flashing): 

o

  Call Appearance: can receive either an extension-to-extension call or an outside line directed to 

an extension assigned to the phone. 

o

  Line Appearance: can receive inbound calls from the outside line. 

o

  Call Monitor 

o

  Call Queue  

Note:   Unless configured otherwise, incoming calls to your phone will ring the audible indicator and flash one 

of the Call Appearance PFKs. 

 

5.3  Ending a Call  

Release a call by using one of the following:  

•  Place receiver back on hook. If using the speakerphone or headset press the SPEAKER button.  
•  Press another PFK. 

o

  If a second call is coming in on another PFK, pressing that PFK will end the current call and 

answer the incoming call (unless auto on hold is enabled). 

• Press 

the 

RELEASE button to end a call and start a new call. 

5.4  Headset  

1.  Plug the cable for the headset into the headset jack on the back side of the phone.  

See icon on back of phone: 

 

2. Press 

the 

SPEAKER button. (You cannot use the speakerphone and headset at the same time). 

3.  When finished with the call, press the SPEAKER button to disconnect.  

A PFK can be created to activate the headset instead of using the SPEAKER button. The PFK must to be set 
up by the System Administrator.  

 

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com 

© 2008 Allworx. All rights reserved 

Version 1. Revised: October 31, 2008 

 

Page 10