Roland FP-7 Guía Del Usuario
120
Various Settings
This specifies which part is to have priority when the effects
assigned to the Upper Tone and Lower Tone differ in Dual Play
(p. 41) or Split Play (p. 43).
assigned to the Upper Tone and Lower Tone differ in Dual Play
(p. 41) or Split Play (p. 43).
1.
Press the [Function] button.
2.
Press the [Multi Effects] button.
The Effects screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Source.”
the [-] [+] buttons to select “Source.”
fig.d-EfxType.eps
4.
Use the [-] [+] buttons to select the part to
which you want to apply effects.
which you want to apply effects.
If same effects are assigned to the Upper Tone and
Lower Tone, the same effects are added to both of
Tones.
Lower Tone, the same effects are added to both of
Tones.
You can connect a commercially available USB CD drive to
the FP-7, and play back separately sold CD-ROMs created for
the VIMA (VIMA TUNES).
Songs on VIMA CD-ROM (VIMA TUNES) are programmed
with “recommended tones” suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA
TUNES), recommended tones will be assigned to the FP-7’s
[Strings/Pad], [Guitar/Bass], and [Voice/GM2] tone buttons,
and these three tone buttons will blink.
When you press a flashing Tone button, the recommended
tone is then selected, enabling you to perform the selected
song using a tone matched to that song as it plays back.
You can set the FP-7 so that the recommended tones are
automatically assigned or not assigned.
the FP-7, and play back separately sold CD-ROMs created for
the VIMA (VIMA TUNES).
Songs on VIMA CD-ROM (VIMA TUNES) are programmed
with “recommended tones” suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA
TUNES), recommended tones will be assigned to the FP-7’s
[Strings/Pad], [Guitar/Bass], and [Voice/GM2] tone buttons,
and these three tone buttons will blink.
When you press a flashing Tone button, the recommended
tone is then selected, enabling you to perform the selected
song using a tone matched to that song as it plays back.
You can set the FP-7 so that the recommended tones are
automatically assigned or not assigned.
1.
Press the [Function] button.
2.
Press the [Reverb] button.
The System screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Recommended
Tone.”
the [-] [+] buttons to select “Recommended
Tone.”
4.
Use the [-] [+] buttons to change the setting.
With the factory settings, this is ”On.“
Setting the Part to Which Effects Are
Added
Added
Setting
Description
Upper
The effect will be preferentially applied to the
Upper tone.
Upper tone.
Lower
The effect will be preferentially applied to the
Lower tone.
Lower tone.
System Settings
Disabling Automatic Selection of VIMA
TUNES Recommended Tones
TUNES Recommended Tones
Setting
Description
On
When you select a song from a VIMA CD-
ROM (VIMA TUNES), recommended tones
will automatically be assigned to the FP-7’s
[Strings/Pad], [Guitar/Bass], and [Voice/
GM2] tone buttons.
ROM (VIMA TUNES), recommended tones
will automatically be assigned to the FP-7’s
[Strings/Pad], [Guitar/Bass], and [Voice/
GM2] tone buttons.
Off
When you select a song from a VIMA CD-
ROM (VIMA TUNES), recommended tones
are not used, and only the FP-7’s internal
tones can be selected.
ROM (VIMA TUNES), recommended tones
are not used, and only the FP-7’s internal
tones can be selected.
FP-7-e.book 120 ページ ２００７年７月１２日 木曜日 午後３時４７分