Roland rk-500 Guía Del Usuario
105
Saving Your Performance
3.
Press the front of the external memory connector cover to close it.
You must leave the external memory connector cover closed except while inserting or
removing USB memory.
removing USB memory.
You can lock the external memory connector cover to prevent theft of the USB memory
(sold separately) connected to the external memory connector.
(sold separately) connected to the external memory connector.
1.
Connect the USB memory (refer to previous section).
2.
Press on the front part of the external memory connector cover to close the
cover.
cover.
3.
Using a screwdriver, remove the anti-theft lock screws (two screws) to the
side of the external memory connector cover.
side of the external memory connector cover.
4.
Secure the anti-theft lock with the screws as shown below.
Be sure to replace removed screws when securing the anti-theft lock.
Locking the External Memory Connector Cover
NOTE
Anti-theft Lock
Screws
Anti-theft Lock
Screws
NOTE
RK-500-e.book 105 ページ ２００６年８月１１日 金曜日 午後４時２９分