Roland rk-500 Guía Del Usuario
133
Settings
The point detected by the touch screen may drift as you use
the VIMA for an extended time. If you notice such a drift, you
can correct it by calibrating the touch screen as follows.
the VIMA for an extended time. If you notice such a drift, you
can correct it by calibrating the touch screen as follows.
1.
Access the main screen.
If the main screen is not shown, press the [EXIT] button
several times to access the main screen.
several times to access the main screen.
fig.d-MainScreen.eps
2.
In the main screen, touch <Menu>.
The menu screen appears.
fig.d-Function-01-2.eps
3.
Touch <Touch Screen>.
A screen like the following appears.
fig.d-touchpanel-1.eps
If you decide to cancel the touch panel position
adjustment, touch <Cancel>.
adjustment, touch <Cancel>.
4.
Touch <OK>.
5.
A point will be indicated. Touch this point.
fig.d-touchpanel-2.eps
If you touch a point other than the indicated one, the
drift may become extremely severe. Be sure to touch
the correct point.
drift may become extremely severe. Be sure to touch
the correct point.
Calibrating the Touch Screen
(Touch Screen)
(Touch Screen)
NOTE
RK-500-e.book 133 ページ ２００６年８月１１日 金曜日 午後４時２９分