Enterasys csx200 Guía Del Usuario

CSX200 Family User’s Guide

161

Displays the WPIM mode. The field toggles between PRIMARY and SECONDARY. In 

a device such as the BRIM-W6 where two WPIMs are utilized, but only one can be active at a 
given time, the second WPIM installed or recognized defaults to Secondary.

Displays the status of the WPIM, Yes (active) or No.

Displays the interfaces available to each WPIM.

The following configuration fields are displayed on the Physical Configuration screen shown in 

Displays the DDS Line Mode. The selections toggle between DDS-PRI 

(primary) and DDS-CC (clear channel). This field should be set according to the instruction of 
your service provider. The default setting for this field is DDS-PRI.

Displays the clock source as either Loop or Local. The Loop setting 

allows the WPIM-DDS to receive its timing information from the service provider and the Local 
setting allows the WPIM-DDS to receive its timing information internally. If DDS-CC is chosen 
for the DDS Line Mode then this field must be set to Loop. The default setting is Loop-Timing.

Displays the internal Loopback as either Line or None. Line loopback is 

reserved for network diagnostics only. The default is NONE.

Informational purposes only. Displays 56000 (bps) for Primary DDS Line 

Mode and 64000 (bps) for Clear Channel DDS Line Mode upon start-up. 

Informational purposes only. Displays 56000 (bps) for Primary DDS Line 

Mode and 64000 (bps) for Clear Channel DDS Line Mode upon start-up.